ATK Crest 8 AP Touring Binding light bronze 91mm
The lightweight version of Crest 10 AP, dedicated to the lighter ski mountaineers.
Versatile, safe, light and now featuring the new AP Brake System and double magneto heel flaps in the new BRONZE colour.
You are just ordering these bindings without the skis? Please inquire which width your ski has in the middle. If you are insecure or your ski is out of the designated widths, our ski hotline will advise you. Depending on the ski boot size and sidecut of your ski, the mounting point of the binding may change and thus the width of the ski may differ below the stopper.
DIN Range: 3.0-8.0
Rec. skiers weight: 30-65kg
20mm adjustment range
Three walking positions (flat, +40mm, +55mm)
Cam Release System ®
Elastic Response System®
Heel elastic travel: 12mm (E.R.S.)
Suitable for ski 900g - 1500g (weight per ski)
Materials Alu 7075, rostfreier Stahl, POM
Brake size: 91mm - suitable for 87mm - 91mm ski waist
Weight: 295g
Brand No.: CR8APLBR.091
This system is characterized by a new geometry of the toe part elements.
Super easy and confident step in on the toe part, with any tech boot available on the market, even in case of worn out soles.
The king of the ATK® patented systems! The CAM RELEASE SYSTEM® is fitted inside of our touring bindings heels in order to drive the boot step-in and vertical release in case of fall. A special CAM profile is pressed towards the heel pins by a pre-tensioned spring: when the step-in or a fall release occur, the pins are forced to go through the CAM profile which provides a precise resistance to the pin release, depending on the release value set on the binding.
-Provides the most stable downhill performances on the market with consistent reduction of bootorsion compared to any other tech heel part
- Extremely precise release performance
- Provides the softest heel step in of the industry
- Small dimensions compared to performance and astonishing lightweight
A spring is placed in between the base plate of the binding and the adjustment screw. When the ski bents under the effect of a compression or a jump, the heel part can slide backward with an elastic travel of 10 or 12 mm, depending on the binding.
- Grants the natural ski flex, also in case of big jumps/compressions
- Improves binding release performance when the binding is stressed
- Reduces the pressure on the ski-boot-binding system
An extraordinary innovative system which requires no further action for activating the rear skibrake. The mechanism is automatically set and by switching from ascent to descent mode, the skibrake is activated without any further action.
External Content - Loadbee
This is a placeholder for third party content, please click to activate.
The external provider might be able to collect user specific data by activating this content. For more information please check out our data protection.