ATK Raider 11 Evo Touring Binding 86mm Brakes black
The spirit of Raider for the last frontier of Free Touring!
Brand new features in captivating purple. A new heel piece with automatic ski-brake and improved toe piece featuring adjustable side release tension. The Raider EVO range is completely redesigned and features a new series of bindings which display the best of ATK Bindings’ technology applied to the Free Touring category. The Raider 11 Evo is not just bindings, it is a work of art by ATK Bindings: a futuristic design for outstanding performances. The main novelty is the heel piece which is fitted with an automatic ski brake and replaces the manual push button mechanism, now activated by rotating the head of the heel piece. The second, is the revolutionary toe piece which features adjustable release values and provides perfect adaptability to one’s own style of skiing.
You are just ordering these bindings without the skis? Please inquire which width your ski has in the middle. If you are insecure or your ski is out of the designated widths, our ski hotline will advise you. Depending on the ski boot size and sidecut of your ski, the mounting point of the binding may change and thus the width of the ski may differ below the stopper.
DIN Range: 3.0-11.0
Adjustment 25mm
Built-in crampons slot assures the perfect insertion of any ATK® crampon size
Double magnetic climbing aid with three walking positions (Flat, +35 mm, +49 mm)
Heel elastic travel: 12 mm (E.R.S.)
Automatic Brake System
NEW! Release Adjustment Toe Piece
Easy Entry System
Snow Pack Proof®
Up-Hill Hardness Variator
Cam Release System®
Magneto Heel Flaps
Elastic Response System®
Suitable for Ski 1000g - 1700g (weight/ single ski)
Materials: Alu 7075, POM, Stainless Steel
Ski brake width: 86mm - suitable up to 86mm ski width
Weight/binding incl. ski brake: 370g
Brand No.: R11P.086
This system is characterized by a new geometry of the toe part elements.
Super easy and confident step in on the toe part, with any tech boot available on the market, even in case of worn out soles.
A special design of the toe part that avoids any snow/ice/debris build-up under the hooking elements.
- No snow pack under the toe part, even with several up-hill/downhill transitions
- Avoids snow loads on the toe piece, granting a perfect lightness at any moment
A multi-position selector is placed in between the front lever and the toe piece base plate. By changing the selector setting, the up-hill mode locking hardness variates by increasing the pressure on the locking mechanism.
- It compensates the boot toe insert wear and tear during the years
- Provides a proper locking strength for each user (softer for lighter users, harder for strong ones)
- Reduces the pressures on the locking mechanism
The king of the ATK® patented systems! The CAM RELEASE SYSTEM® is fitted inside of our touring bindings heels in order to drive the boot step-in and vertical release in case of fall. A special CAM profile is pressed towards the heel pins by a pre-tensioned spring: when the step-in or a fall release occur, the pins are forced to go through the CAM profile which provides a precise resistance to the pin release, depending on the release value set on the binding.
-Provides the most stable downhill performances on the market with consistent reduction of bootorsion compared to any other tech heel part
- Extremely precise release performance
- Provides the softest heel step in of the industry
- Small dimensions compared to performance and astonishing lightweight
An ingenious as simple magnet system provides the handling and stabilization of the heel flaps.
A spring is placed in between the base plate of the binding and the adjustment screw. When the ski bents under the effect of a compression or a jump, the heel part can slide backward with an elastic travel of 10 or 12 mm, depending on the binding.
- Grants the natural ski flex, also in case of big jumps/compressions
- Improves binding release performance when the binding is stressed
- Reduces the pressure on the ski-boot-binding system
An extraordinary innovative system which requires no further action for activating the rear skibrake. The mechanism is automatically set and by switching from ascent to descent mode, the skibrake is activated without any further action.
The adjustable settings of the heel release are now available for the toe part. The new toe part by ATK Bindings features adjustable release settings and combined with the heel piece it delivers top class stability.
External Content - Loadbee
This is a placeholder for third party content, please click to activate.
The external provider might be able to collect user specific data by activating this content. For more information please check out our data protection.