Fritschi Tecton 13 Touring Binding incl. Brakes
The Tecton impresses the powder fan not only with the best downhill performance. New adjustment range up to DIN 13 for even more power and safety in powder.
On the steepest slopes, it gives a secure hold and only releases when it really has to. It is just as strong on the ascent. The light weight and easy operation make all powder slopes effortlessly accessible.
In the back, where the forces are highest, the Tecton remains as stable and precise as an alpine bind-ing. The hold-down system with a non-turning alpine heel jaw and the rail transmits the power directly from the boot to the ski without any loss. The Tecton equals both the performance and the safety of alpine bindings. Any unwanted release is prevented by the long dynamic path. The binding reliably releases at the DIN setting. The easy step-in and the intuitive control provide security, especially in challenging terrain. The right mix of light high-tech synthetics and high-quality metal alloys provides superior stability at a low weight (only 550 g / unit).
In the back, where the forces are highest, the Tecton remains as stable and precise as an alpine
binding. The hold-down system with a non-turning alpine heel jaw and the rail transmits the power directly from the boot to the ski without any loss.
The Tecton equals both the performance and the safety of alpine bindings. Any unwanted release is prevented by the high elasticity. The binding reliably releases at the DIN setting.
The easy step-in and the intuitive control of the Tecton provide security, especially in challenging terrain
One model in three color versions – interchangeable Color Clips are available as accessories in five additional attractive colors to make your binding look the way you want
Please refer to the Fritschi compatibility table! Here you can see if your ski boot is compatible with the binding.
Compatibility table
You are just ordering these bindings without the skis?
Please inquire which width your ski has in the middle.
If you are insecure or your ski is out of the designated widths, our ski hotline will advise you.
Depending on the ski boot size and sidecut of your ski, the mounting point of the binding may change and thus the width of the ski may differ below the stopper.
DIN Range: 5.0 - 13.0
Alpine heel with Rail
Lateral release at the toe with DIN setting and 13 mm elasticity for the toe-cap
Vertical release at the heel with 9 mm elasticity for the heel
Reliable release with 10 mm elasticity for the flexing ski
Easy step-in
Intuitive handling
Color Clips incl: in Yellow Green, Ice Blue, Black
Available at specialized retailers: Black
Ski brake width: 80mm- suitable for up to 85mm ski width
Ski brake width: 90mm - suitable for 85mm-95mm ski width
Ski brake width: 100mm - suitable for 95mm-105mm ski width
Ski brake width: 110mm - suitable for 105 - 115mm ski width
Ski brake width: 120mm - suitable for 115mm-125mm ski width
Weight: app. 550g / unit without ski brake, +80g skibrake incl.
Brand No.: 4097
Please refer to the Fritschi compatibility table! Here you can see if your ski boot is compatible with the binding.
The boot remains fixed
As an absolute exclusivity, the rail in the alpine heel engages in the back of the boot, secures it in the center and prevents a loss of power.
Heel unit remains laterally stable
Due to the solid, non-turning heel the power flow, unlike other pin bindings, is not interrupted by a rotating movement when the skis turn.
Direct contact boot-binding-ski
The alpine heel jaw is pressing the sole of the boot firmly against the heel plate, which is directly connected with the ski, and provides consistent direct traction.
Lateral release where it belongs for optimal performance
The pin binding with lateral release and DIN set-ting at the toe, where the lateral forces are acting in the event of a fall.
Releasing only if necessary
The long dynamic travel of 13 mm for the toe-cap prevents an unwanted release and cushions any lateral impact.
Front release with dynamic response
As in alpine bindings, when the DIN value is set, the front release occurs via a heel jaw with a dy-namic way of 9 mm. The reset force of the spring prevents a pre-release and compensates the high tensile forces on the leg in a forward fall.
Immediate release of the boot with front re-lease
After the release of the heel, the boot tips for-ward. Due to the pressure of the front of the boot on the Release Lever, the boot is also immedi-ately released by the toe unit.
Solid support while climbing and safety in an emergency
The boot is fixed and held in the middle, but the binding will release in response to high active forces.
Clamping systems must be blocked while climb-ing to ensure stability
Easy step-in
The tip of the boot is optimally positioned by means of a solid stop in front and a positioning guide. Responding to slight pressure, the system closes with the pin levers engaging precisely in the inserts.
The sequence of movements is comparable with that of an alpine binding.
Easy operation means more than comfort
Switching from downhill to uphill mode and vice versa is very simple without having to step out of the binding. The three ergonomically walk mode levels can also be changed in no time with a pole
Swiss made – designed and made to last
Sustainability has always been a priority of Fritschi’s corporate culture and is part of the day-to-day work of the entire team. The careful use of resources begins with the development. The design and the selection of materials are based on durability. Each individual part is manufactured in Switzerland and consists of environmentally compatible high-tech synthetics and high-quality metals. After the assembly in Reichenbach the high-quality products are boxed into reusable packaging, which is also made in Switzerland.
External Content - Youtube Video
This is a placeholder for third party content, please click to activate.
The external provider might be able to collect user specific data by activating this content. For more information please check out our data protection.
External Content - Loadbee
This is a placeholder for third party content, please click to activate.
The external provider might be able to collect user specific data by activating this content. For more information please check out our data protection.