Hagan Pure 8 Rental Touring Binding 97mm Brakes
The little sister of the Pure 10.
Designed with a Z-value of 3-8 for lightweight tourers. Also ideal for the first ski tours with the kids.
Engineered by ATK, identical construction to ATK Crest 8.
All HAGAN pin bindings are designed and manufactured by ATK ®. Based in Fiorano Modenese (Modena, Italy) ATK® is one of the world's leading manufacturers of lightweight touring bindings. ATK® products are characterized by unrivaled precision, lightness and durability. A strong focus on research and development ensures ever higher standards of quality and performance for the best user experience.
You are just ordering these bindings without the skis?
Please inquire which width your ski has in the middle.
If you are insecure or your ski is out of the designated widths, our ski hotline will advise you.
Depending on the ski boot size and sidecut of your ski, the mounting point of the binding may change and thus the width of the ski may differ below the stopper.
DIN Range: 3.0 - 8.0
Adjustable: 50 mm
Adjustable vertical and hirizontal heel retention
Heel Flap system with three walking positions (flat, +26,5mm, +40mm)
Easy Entry System
Cam Release System ®
Elastic Response System®
Detatchable crampons mount
Materials Alu 7075, Stainless Steel, POM
Ski brake width: 97mm- suitable for 92mm - 97mm ski width
Weight: 300g
Brand No.: PURE8RF.097
Easy Entry System
This system is characterized by a new geometry of the toe part elements.
Super easy and confident step in on the toe part, with any tech boot available on the market, even in case of worn out soles.
Cam Release System®
The king of the ATK® patented systems! The CAM RELEASE SYSTEM® is fitted inside of our touring bindings heels in order to drive the boot step-in and vertical release in case of fall. A special CAM profile is pressed towards the heel pins by a pre-tensioned spring: when the step-in or a fall release occur, the pins are forced to go through the CAM profile which provides a precise resistance to the pin release, depending on the release value set on the binding.
-Provides the most stable downhill performances on the market with consistent reduction of bootorsion compared to any other tech heel part
- Extremely precise release performance
- Provides the softest heel step in of the industry
- Small dimensions compared to performance and astonishing lightweight
Elastic Response System®
A spring is placed in between the base plate of the binding and the adjustment screw. When the ski bents under the effect of a compression or a jump, the heel part can slide backward with an elastic travel of 10 or 12 mm, depending on the binding.
- Grants the natural ski flex, also in case of big jumps/compressions
- Improves binding release performance when the binding is stressed
- Reduces the pressure on the ski-boot-binding system
External Content - Loadbee
This is a placeholder for third party content, please click to activate.
The external provider might be able to collect user specific data by activating this content. For more information please check out our data protection.